IdealHeatTransfer L3
Created Mittwoch 21 Oktober 2015
Heat Transfer model assuming an ideal heat transfer
1. Purpose of Model
The temperature values and the occurring heat flow with respect to time are computed for an ideal heat transfer process.
2. Level of Detail and Physical Insight
2.1 Level of Detail
Referring to Brunnemann et al. [1], this model refers to the level of detail L4 because the system is modelled with the use of balance equations, which are spatially averaged over the component.
2.2 Physical Insight
In an ideal heat transferring process the heat transfer coefficient tends to infinity. This leads to a temperature difference tending to zero for a finite heat flow rate or to a heat flow rate tending to infinity for a finite temperature difference.
3. Limits of Validity
Only valid for highly effective heat transfer processes
4. Interfaces
The model communicates via outer models and records. Thus its expects to have:
- an outer model named geo as defined Fundamentals:Geometry:GenericGeometry
- an outer record named iCom as defined in Basics:Records:IComBase L4
5. Nomenclature
6. Governing Equations
The volume temperature is set as the heat port temperature
7. Remarks for Usage
8. Validation
9. References
[1] Johannes Brunnemann and Friedrich Gottelt, Kai Wellner, Ala Renz, André Thüring, Volker Röder, Christoph Hasenbein, Christian Schulze, Gerhard Schmitz, Jörg Eiden: "Status of ClaRaCCS: Modelling and Simulationof Coal-Fired Power Plants with CO2 capture", 9th Modelica Conference, Munich, Germany, 2012
10. Authorship and Copyright Statement for original (initial) Contribution
Author:
DYNCAP/DYNSTART development team, Copyright 2011 - 2022.
Remarks:
This component was developed during DYNCAP/DYNSTART projects.
Acknowledgements:
ClaRa originated from the collaborative research projects DYNCAP and DYNSTART. Both research projects were supported by the German Federal Ministry for Economic Affairs and Energy (FKZ 03ET2009 and FKZ 03ET7060).
CLA:
The author(s) have agreed to ClaRa CLA, version 1.0. See https://claralib.com/pdf/CLA.pdf
By agreeing to ClaRa CLA, version 1.0 the author has granted the ClaRa development team a permanent right to use and modify his initial contribution as well as to publish it or its modified versions under the 3-clause BSD License.
11. Version History
- 2012 - v 0.1 - initial implementation - Friedrich Gottelt, XRG Simulation
Backlinks: ClaRa:Components:MechanicalSeparation:BalanceTank L3 ClaRa:Components:MechanicalSeparation:Bottle L3 ClaRa:Components:MechanicalSeparation:Drum L3 ClaRa:Components:MechanicalSeparation:FeedWaterTank L3 ClaRa:Basics:ControlVolumes:FluidVolumes:VolumeVLEGas L3 ClaRa:Basics:ControlVolumes:FluidVolumes:VolumeVLE L3 TwoZones ClaRa:Basics:ControlVolumes:FluidVolumes:VolumeVLE L3 TwoZonesNPort ClaRa:Basics:ControlVolumes:Fundamentals:HeatTransport:Generic HT:Constant L3